**The Official Vapenwiser Thread**

[Vapenwiser]

 

Thanks for the support FadedSteelersfan!!

Originally Posted by DreamTime

Hi Vapenwiser. Welcome to TC!

I am curious about your "Heady Holders".
What material are they made out of?
And most importantly, what are the various sizes of slots?
How many 14mm, 18mm and are their any other sizes (like for 510 type e-cig carts or other stuff)

Hello DreamTime,

Thanks for the warm welcome!

Our Heady Holders are made from an eco-friendly, recycled, high density plastic. It has great heat resistance, and is dense enough to be a solid base for all your slides and domes, while still being forgiving enough to prevent chips and cracks in your glass accessories.

There are 3 different size holes on the holders, 14mm, 18mm, and a smaller hole for dabbers, nails, glow rods,scrapers, etc.

We also have a V-slot on the side, to lay down a hot or fully loaded dabber or glow rod, or anything else you may need to set down while you are doing the deed.

You can see pictures and check out our products here: WWW.Vapenwiser.com/products

Thanks again,

-Vapenwiser

[Paul420MW]

 

I didn't have any problems with my halen honey hole clogging so I don't see why this would. Ti seems to stay hotter and get hotter quicker than quartz.

Gram dabs? Not sure thats a good test because I haven't seen anyone do one other than on youtube with some huge flower peice.

The only issue I can see with these is the exposed ti might be dangerous.

[Vapenwiser]

 

Originally Posted by r3vrb

anyway can we get some pic of the DI nail? i cant find them on your facebook nor in this thread.

OR is it the same one but it fits DI???

Yes, same design, just has a DI male joint instead of the female joint.

-Vapenwiser

[biclighterinuse]

 

this thread has been cleaned up since both sides arguing only had speculation about their ideas.

please keep it civil, everyone. it is a forum for ideas and thoughts to be exchanged, but common courtesy needs to still be respected while posting.

bg-you have every right to ask questions, but if he's gonna dance around the answers, then he's giving you his best answer to the question.

dd- you don't own one and were coming up with the same speculations that you were shooting bg down on, take it to PM.

vapenwiser- as a sponsor, you really need to be addressing questions and having better choices for words, insulting members isn't a great way to advertise your products.

[Vapenwiser]

 

Thank you moderators!

I never asked for the crazy onslaught. I can respect everyone's point of view, good or bad. I never set out to insult anyone , but that was a legitimate attack, aimed at making Vapenwiser look bad, over 4 - 5 pages. The products and videos speak for themselves.

Keep all discussions positive and on topic, please.

All questions and comments are welcome.

-Vapenwiser

[biclighterinuse]

 

again, that wasn't an attack, members HAVE the right to ask questions and expect answers from you.

bg has NO affiliations with any nail company so it does him no good to slander anyone.

[KingGong]

 

I will give my input. These nails are good! they fully vape any dab i toss at it and can handle large amounts.. There will be no clogging issue.. (A gram dab BG? Really? come on bro be realistic...) Stop being hecklers especially if you havent tried the product before.. My only critique is it seems to need more heat to get the nail to proper operational temp, but thats a moot point for me, as it fully vapes due to the extra added material.. This is coming from someone who has used HE DYD DnF Kut pads and glass n quartz... I think its safe to say my opinion is pretty unbiased as I have actually used the piece...


Peace and love.

[baked goods]

 

Originally Posted by Vapenwiser

Thank you moderators!

I never asked for the crazy onslaught. I can respect everyone's point of view, good or bad. I never set out to insult anyone , but that was a legitimate attack, aimed at making Vapenwiser look bad, over 4 - 5 pages. The products and videos speak for themselves.

Keep all discussions positive and on topic, please.

All questions and comments are welcome.

-Vapenwiser

Nah Vapenwiser. You don't respect my point of view or opinion. You made that clear in PM. You don't like me because I don't praise you or your nail. Why do you say you're so open to opinions and critiques about your product if you're not open to mine? What is wrong with someone questioning something new on a forum? Nothing! There was no attack on your product, only an attack on the faulty logic or shitty response you gave me. Since you think me questioning your product was a blatant attack, I would say that you're open to praise, not opinions.

Anyone who PM's a potential customer who has doubts about their nail design and says , "you should be praising me," thanks Vapenwiser, is way too self-righteous. Why should I be showering him with praise? Is he donatin every dime after overhead cost of these nails to try and end world hunger? Really man? I can't make up my own mind on things?

[HappyHoney]

 

I was just taken back by the extra heavy introduction
Has a very informercial-like vibe
Which obviously arouses my bullshit meter

Now dont get me wrong
Im all about advances in technology
Especially with Ti!!
And
Ive never tried one, sorry
But from one look...
a hunk of hot metal just sticking out top and taking longer to cool down?
Yikes
My dogs hiding just thinking bout it. Lol
And my domes would just be so jealous

this being said, big buildup has really made me curious
Im intrigued enough that i want to try!
Im sure im not the only one

But after reading BGs experience, wow man
Better watch what bridges you burn
The Longtime residents here have and continue to spend big $ of their own and influence purchases of many others
Not always a smart business decision to try n get cocky w/ em. Lol

[Colonel Forbin]

 

So how long until that 1 gram dab video? I just wanna see dude back up his claims. I would of tried that when r&d was going on just to see how fat of a dab the nail can take before I tried to sell a product but then again what do I know about anything I'm just a stoner posting on a forum. And if asking questions is considered an attack on your product then I want whatever your dabbing cuz I havnt been that paranoid in years if anything said on this forum is gonna hurt your business its because of you. If people never asked questions we would never have answers. Don't just act like people are trolling or have their own hidden agenda.

On a side note thanks bic for cleaning shit up and not being biased towards the forum sponsor good to see bullshit like that dont fly here homie