help...please

[reefermaddness420]

 

i own a vaporbros and my whip is getting rather dirty, i have been told to just scrape and smoke, i have also been told to extract with iso to have even more fun. but i do not know how to extract with the iso... i'm sorry if there has been a thread about this in the past, but i couldn't find one. please help

peace

[lukestoned]

 

use iso alcohol and salt (cap one end fill w/salt and iso cap the other end and shake) the resin will come off after awhile

[door empty]

 

Yeah- do that to clean it.
And if you want to extract the goodness and smoke it.. just leave out the salt, get all the resin soaked in to the alcohol, then filter it through a coffee filter onto a glass plate or something, let it evaporate till it's dry, then scrape it up with a razor blade. There's a thread on it that Ninja wrote in the hash and oil section.

[hashallday]

 

id heat the iso before hand, will make the vape resin come off better

[reefermaddness420]

 

so how long do you suggest i let it soak into the iso...if im right i believe its like 30-100 seconds. and hash, how hot should i heat the iso before hand.

[GrizzleB]

 

You can soak for longer since you arent exactly doing this for hash but plan on pulling an end product from it. I always use to fill a glass with alc and siphon it up and down with the whip until I got the majority of stuff out, then filter it.

[reefermaddness420]

 

so basically after its clean, filter it
then let it evap then enjoy?

[GrizzleB]

 

Originally Posted by reefermaddness420

so basically after its clean, filter it
then let it evap then enjoy?

yup

[reefermaddness420]

 

word
thanks guys, ill let you guys know how it works out

[Joshuam2107]

 

Originally Posted by GrizzleB

You can soak for longer since you arent exactly doing this for hash but plan on pulling an end product from it. I always use to fill a glass with alc and siphon it up and down with the whip until I got the majority of stuff out, then filter it.

If siphon you mean altering the levels of alc from one side to the other then yes..that is good.

I like to take the glass part off and put it in a ziploc.
Hang it up somewhere like in a closet so as to make sure the glass stays immursed in alcohol..
Then just empty the glass resin in the bag and empty the bag in the pyrex dish, ready for evap. I've never felt a need to strain it in a coffee filter though as it is all oil in there anyway, right?
If not then i might should consider straining it from now on..